Download
this page
Sleeve Valves, Lockouts,
Blow Guns
& Accessories
| Valve Part # | MPNT X FNPT Thread |
Lockout Part # |
Performance Data | |||
| NPT | 100 PSIG | 80 PSIG | ||||
 |
3W1 | 1/8" | LO1 | 1/8" | 16 | 14.5 |
| 3W2 | 1/4" | LO2 | 1/4" | 40 | 36 | |
| 3W3 | 3/8" | LO3 | 3/8" | 65 | 59 | |
| 3W4 | 1/2" | LO4 | 1/2" | 140 | 127 | |
Provides low cost ON-OFF Exhaust operation.
Slide the sleeve to ON position. Exhaust ports are closed, valve is open.
Reversing the sleeve opens the exhaust ports and shuts off flow.
Valve with lockout complies with OSHA Standard 29 CFR, PART 1910
Working Pressure: to 200 PSIG
Temperature: -25 to +200°F
Blow Guns
| Lever | Button | Nickel Plated-Lever | |
 |
BGL-30 | BG-30 | BGL-30-N |
| BGL-30TP | BG-30TP | BGL-30TP-N |
Blow guns are available with our standard safety tip or threaded safety tip.
Each gun can be ordered with a pressed tip which is not removable, or the threaded
tip that is 1/8" MNPT.
Inlet Pressure: 150 PSIG Max
Temperature: 32-180°F
Body: Diecast Zinc
Seal: Buna-N
Inlet: 1/4" FPT
Flow: Safety Tip: 19.8 CFM @ 100 PSIG
Standard Tip: 9.3 CFM @ 100 PSIG
| Complete Gun | Nozzle Only | Description | Performance | ||
| Flow CFM | Outlet Blocked | Noise Level dbA | |||
| HBGL21 | HBGN1 | Standard nozzle, general blowing and drying applications | 17.5 | 20.0 | 89.5 |
| HBGL2B5 | HBGNB5 | Air screen nozzle reduces chip flyback | 5.0 | 18.0 | 85.0 |
| HBGL25 | HBGN5 | High flow safety nozzle for general dusting and chip removal | 20.0 | 20.0 | 89.0 |
| HBGL26** | HBGN6 | Needle tip nozzle for fine flow and small holes | (**) | ||
| HBGL27** | HBGN7 | Rubber tipped nozzle for delicate surfaces and for blowing out fluid lines | (**) | ||
| HBGL2X3 | HBGX3 | 3" Extension nozzle for extending reach | 15.0 | 21.0 | 85.5 |
| HBGL2X6 | HBGX6 | 6" Extension nozzle for extending reach | 14.1 | 22.0 | 84.0 |
| HBGL2X12 | HBGX12 | 12" Extension nozzle for extending reach | 13.3 | 24.0 | 85.5 |
| HBGN2 | Flexible extension nozzle (4 inch) | ||||
| HBGN3 | Flexible extension nozzle (12 inch) | ||||
| HBGADP | Quick disconnect adapter allows users to switch nozzles easily | ||||
| HBGLKT-30 | Quick disconnect blow gun with tips, plastic case includes, HBGNB5, HBGN6, HBGX6, HBGN5, HBGN7, HBGN1, HBGADP | ||||